Ape Crate 54895 59270 | Orangutan Crate 59639 c2si-1

Primate Restraint - Transport

Catalog # 54895

Aluminum and Stainless-Steel materials to be used.
Overall size is approximately 60” Long X 33½” Wide X 62” High, with casters.
Guillotine Door provided at one end, Horizontal Door provided at the other end, each with SS Wire Panels that have a 2” x 2” x ¼” mesh configuration.
Side Walls of Crate will have SS Wire Panels that has a 2” x 2” x ¼” mesh configuration.
All sharp edges removed.
Removable Plexiglass Privacy Walls provided on Guillotine Doors, Walls and Ceiling Panel.
Removable Plexiglass Walls will have a Feed Door with secure Latch.
Removable Plexiglass Panels will have handles to help attach and remove from Cage.
Removable Plexiglass Privacy Panels will have fasteners to keep them in place.
Removable Plexiglass Privacy Panels will have ventilation holes in them.
Thermal Neutral Floor Panel provided over the 2” x 2” x ¼” mesh floor panel.
Removable 4” SS Stem Casters provided.
Tie down brackets provided to anchor to existing exhibit at each end.

Removable Waste Pan provided under frame of floor

Catalog # 59639

Aluminum and Stainless-Steel materials to be used.
Overall size is approximately 35” Wide X 58” Long x 68” High, with casters.
Interior Height to be 62” minimum.
Supported on (4) 5” SS Casters. Must clear 4” x 4” lateral angles on floor.
Casters must have a 5” minimum set back from the ends of Crate.
Guillotine Door and Horizontal Door provided at one end, with secure pad-lockable Latches.
Horizontal Door provided at the other end, with secure pad-lockable Latches.
Doors will have 6” tall x 12” long wire mesh panels to use for feeding animals.
Doors will have Handles for lifting but won’t exceed 3” tall above crate.
Side Walls of Crate will have SS Wire Panels that has a 2” x 2” x ¼” mesh configuration.
Side Wall mesh is limited to a 13” center section to avoid rachet straps on ends.
Removable Plexiglass Privacy Panels will have ventilation holes in them.
2” x 2” x ¼” mesh floor panel. (Customer preference on floor material)
Tie down brackets provided to anchor to existing exhibit at each end.
Provide various other features like Handles alongside for lifting and secure lock tabs.
Removable Waste Pan with secure latches.
All sharp edges removed.
Conceptual Drawing to approve before manufacturing.

Catalog # 59270

Tig/Mig welded with Stainless Steel materials.
Outer dimensions of crate: ~50” wide x 54” long x 60” tall (NO CASTERS)
Supported on Removable 6” diameter locking SS Stem Casters.
Removable Plexiglass panels with ventilation air holes on all sides of crate.
Plexiglass Panels will have handles
(2) lockable access ports on long sides of the crate, on plexiglass panels.
Fork Pockets on all sides to lift Crate with Forklift.
Ability to attach a lixit (a threaded hole with removeable water lixit) apparatus vs. a water bowl; IATA required food bowl and is removeable.
Horizontal Door made with 2” x 2” SS Mesh on one end with secure latches.
One horizontal slider door made out of 2” x 2” SS Mesh.
One guillotine door at other end made out of 2” x 2” mesh with secure latches.
Plexiglass panels with have secure latch mechanism.
Various Lock Tabs provided for pad-lockable security.
Removable Seaboard Plastic Floor Panel provided over the top of the cage floor.
Removable Waste Pan provided.
Various tie down brackets.
“Warning Live Animal” Signage provided all over Crate.