One-Over-Three Configuration that allows Horizontal Pairing only.

Overall height of rack is approximately 81-1/2”.

Overall dimensions are ~31-3/4” wide x 18” deep. Interior height of each cage is 19-1/4”.

Can be infinitely paired to other like Units from Carter2 Systems.

Each cage has 4.5 sq. ft. of floor area based on interior cage dimensions.

Rack is supported on SS Casters with 5” Dia. X 2” wide wheels, sealed SS bearings.  Front casters have Brakes.

All metal components are #304 stainless steel.

Polished Latches provided. (latches not to be bead blasted with Unit)

Hinged Doors are constructed of 3/8” diameter rod with ½” x ½” x 1/8” SS Wire Mesh.

Smaller Horizontal Sliding Animal Door ½” x ½” x 1/8” SS Wire Mesh. (¼” perimeter rod)

The primary frame members are fabricated/formed with 1” SS Box Tube.

Back of cages are fabricated of 16 Ga. SS sheet metal.

Removable Flush Waste Pans under cages.  Waste Pans drain into Trough System.

Covered Drain Trough with Drain Tube provided for cage sanitation.

The caster base frame is fabricated of 1” SS Box Tube.

Fully Removable Socialization Panels on both RH/LH of cages. 

Removable Divider Panels are ½” x ½” SS Wire Mesh with 3/8” Perimeter Rod and Handle with secure latch mechanism.

SS Rotating Food Bowl with secure latch.

All units are bead blasted to a matte finish.