All #304 Stainless Steel construction.

Total quantity of 6 Paired 32” tall 3.5 Sq. Ft. Cages, 2 RH, 2 Center and 2 LH.

(6) Cages are integral to the Rack; they do not come off.

Back and Side Sheet is made with 16ga. SS.

Cage Wire consists of a .125” Dia. SS Welded Wire Panel, 3/4” x 3/4” Floor and 3/4” x 1” Front and Top sections formed into “U” Shape.

Paired opening has Slide Guides and SS Latch provisions for a Divider Panel.

One Perforated Divider included per paired Cage. (4 per rack)

Slots in rear of cage for water fittings on Rack to pass through.

Telescoping Horizontal Sliding Animal Doors provided with secure Latches.

Linear Perches provided made with 3/4” Dia. SS Tube.

A Squeeze Back with dual UHMW guided slide pull Handles and SS Latches for smooth and easy operation.  Latches in various forward positions.

Squeeze Tray made with .125” Dia. Welded Wire Panel with ¼” Dia. perimeter rod.

(6) Cage Fronts provided, made with welded wire and perimeter rods.

Data Plate provided.

Foraging Board/Feed Box provided for each cage.

Food Slots provided for Foraging Board/Feed Box access.

Cage sides allow for horizontal pairing between all Cages and Racks.

Self-Storing Dividers between cages/racks with secure latches.

One Solid Divider between Cages / Racks.

Tethering Lock Device installed on top and bottom cage animal doors.

Bead Blasted to a Matte Finish.

Image below shows the racks paired with play cage model 45816